EN 12697-8:2018
(Main)Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
This document describes a procedure for calculating volumetric characteristics of a compacted bituminous specimen: the air voids content (Va), the voids content in the mineral aggregate filled with binder (VFB) and the voids content in the mineral aggregate filled with binder and additives (VFBad) for the case of mixtures containing additives in their composition.
The method is suitable for specimens which are laboratory compacted or specimens cut from the pavement after placement and compacting or from laboratory compacted slabs, either by coring or sawing.
These volumetric characteristics can be used as mix design criteria or as parameters for evaluating the mixture after placing and compacting in the road.
Asphalt - Prüfverfahren - Teil 8: Bestimmung von volumetrischen Charakteristiken von Asphalt-Probekörpern
Diese Dokument beschreibt ein Verfahren zur Berechnung von volumetrischen Charakteristiken eines verdichteten Asphalt-Probekörpers: des Hohlraumgehalts Va, des Bindemittelausfüllungsgrads VFB und – für Gemische, die Zusatzstoffe enthalten – des Bindemittel und Zusatzstoffausfüllungsgrads VFBad.
Dieses Verfahren ist für im Labor verdichtete Probekörper sowie für Probekörper, die durch Bohren oder Sägen einer eingebauten und verdichteten Fahrbahndecke oder einer im Labor verdichteten Platte entnommen wurden, geeignet.
Diese volumetrischen Charakteristiken können als Kriterium bei einer Asphaltmischgutkonzeption oder als Parameter für seine Beurteilung nach dem Einbau und der Verdichtung in der Straße verwendet werden.
Matériaux enrobés - Méthodes d'essai - Partie 8: Détermination de la teneur en vides caractéristiques des matériaux bitumineux
Ce document décrit la procédure permettant de calculer des caractéristiques volumétriques d’une éprouvette bitumineuse compactée : la teneur en vide d'air Va), la teneur en vide du squelette granulaire comblés par le liant (VFB), et la teneur en vide du squelette granulaire comblés par le liant et les additifs (VFBad) pour les mélanges contenant des additifs dans leur composition.
Cette méthode peut être utilisée pour les éprouvettes compactées en laboratoire ou prélevées dans la chaussée par carottage ou sciage après mise en œuvre et compactage.
Ces caractéristiques volumétriques peuvent être employées comme critères de formulation ou comme paramètres d’évaluation du mélange après sa mise en œuvre et son compactage dans une chaussée.
Bitumenske zmesi - Preskusne metode - 8. del: Ugotavljanje značilnosti votlin v bitumenskih preskušancih
Ta evropski standard opisuje postopek za izračun volumetričnih značilnosti zgoščenega bitumenskega preskušanca: vsebnost zraka (Vm), vsebnost votlin v zmesi kamnitih zrn z vezivom (VFB) in vsebnost votlin v zmesi kamnitih zrn z vezivom in dodatki (VFBad) za primere zmesi, ki imajo v svoji sestavi dodatke.
Metoda je primerna za preskušance, ki so laboratorijsko stisnjeni, ali preskušance, ki so z vrtanjem ali žaganjem izrezani iz voziščne konstrukcije po vgradnji in utrjevanju.
Te volumetrične značilnosti je mogoče uporabiti kot merila za načrtovanje zmesi ali parametre za ocenjevanje zmesi po vgradnji in utrjevanju na cesti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12697-8:2019
01-marec-2019
1DGRPHãþD
SIST EN 12697-8:2004
QRVWLYRWOLQY%LWXPHQVNH]PHVL3UHVNXVQHPHWRGHGHO8JRWDYOMDQMH]QDþLO
ELWXPHQVNLKSUHVNXãDQFLK
Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of
bituminous specimens
Asphalt - Prüfverfahren - Teil 8: Bestimmung von volumetrischen Charakteristiken von
Asphalt-Probekörpern
Mélanges bitumineux - Méthodes d'essai - Partie 8 : Détermination des pourcentages de
vides caractéristiques des éprouvettes bitumineuses
Ta slovenski standard je istoveten z: EN 12697-8:2018
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-8:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12697-8:2019
---------------------- Page: 2 ----------------------
SIST EN 12697-8:2019
EN 12697-8
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 12697-8:2003
English Version
Bituminous mixtures - Test methods - Part 8:
Determination of void characteristics of bituminous
specimens
Matériaux enrobés - Méthodes d'essai - Partie 8: Asphalt - Prüfverfahren - Teil 8: Bestimmung von
Détermination de la teneur en vides caractéristiques volumetrischen Charakteristiken von Asphalt-
des matériaux bitumineux Probekörpern
This European Standard was approved by CEN on 9 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-8:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12697-8:2019
EN 12697-8:2018 (E)
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Determination of the air voids content (V ) . 6
a
4.1 Principle . 6
4.2 Calculation . 6
4.3 Precision . 7
4.4 Test report . 7
5 Determination of the percentage of the voids in the mineral aggregate filled with
binder . 7
5.1 Principle .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.