iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 16571

(Main)

Systems for evacuation of plume generated by medical devices

Systems for evacuation of plume generated by medical devices

Full revision of currently published 2014 version. Additionally, expand scope to include plume evacuation systems for endoscopic procedures (e.g. minimally invasive, laparoscopic). The scope is now the following: This Standard specifies requirements and guidelines for the design, manufacture, installation, function, performance, maintenance, servicing, documentation, testing, and commissioning of equipment for evacuation of plume generated by medical devices. It is applicable to: a) portable and mobile plume evacuation systems, b) local stationary plume evacuation systems, c) dedicated central pipeline systems for plume evacuation systems, and d) plume evacuation systems integrated into other equipment (e.g. laser equipment).

Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs médicaux

General Information

Status
Published
Publication Date
27-Mar-2024
ICS
11.040.10 - Anaesthetic, respiratory and reanimation equipment
Technical Committee
ISO/TC 121/SC 6 - Medical gas supply systems
Drafting Committee
ISO/TC 121/SC 6 - Medical gas supply systems
Current Stage
6000 - International Standard under publication
Completion Date
30-Jan-2024
Ref Project

Relations

Consolidates
ISO/TS 23471:2022 - Experimental designs for evaluation of uncertainty — Use of factorial designs for determining uncertainty functions
Effective Date
06-Jun-2022
Revises
ISO 16571:2014 - Systems for evacuation of plume generated by medical devices
Effective Date
06-Jun-2022

Buy Standard

ISO 16571:2024 - Systems for evacuation of plume generated by medical devices Released:28. 03. 2024ISO 16571:2024 - Systems for evacuation of plume generated by medical devices Released:28. 03. 2024
PreviousNext
Standard
ISO 16571:2024 - Systems for evacuation of plume generated by medical devices Released:28. 03. 2024
English language
37 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 16571:2024 - Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs médicaux Released:28. 03. 2024ISO 16571:2024 - Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs médicaux Released:28. 03. 2024
PreviousNext
Standard
ISO 16571:2024 - Systèmes d'évacuation des fumées chirurgicales générées par l'utilisation de dispositifs médicaux Released:28. 03. 2024
French language
40 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

International
Standard
ISO 16571
Second edition
Systems for evacuation of plume
2024-03
generated by medical devices
Systèmes d'évacuation des fumées chirurgicales générées par
l'utilisation de dispositifs médicaux
Reference number
ISO 16571:2024(en) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 16571:2024(en)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland

© ISO 2024 – All rights reserved
ii

---------------------- Page: 2 ----------------------
ISO 16571:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 General requirements . 7
4.1 Components .7
4.2 Systems .7
4.3 Capture device .8
4.4 Transfer tubing .9
4.5 Filtration subsystem .9
4.6 Control subsystem .9
4.7 Flow-generator .9
4.8 Exhaust subsystem .10
4.9 Colour coding .10
5 Portable and mobile system requirements . 10
5.1 General requirements .10
5.2 Acoustic noise test .
...

Norme
internationale
ISO 16571
Deuxième édition
Systèmes d'évacuation des fumées
2024-03
chirurgicales générées par
l'utilisation de dispositifs médicaux
Systems for evacuation of plume generated by medical devices
Numéro de référence
ISO 16571:2024(fr) © ISO 2024

---------------------- Page: 1 ----------------------
ISO 16571:2024(fr)
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2024
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse

© ISO 2024 – Tous droits réservés
ii

---------------------- Page: 2 ----------------------
ISO 16571:2024(fr)
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 2
3 Termes et définitions . 3
4 Exigences générales . . 7
4.1 Composants .7
4.2 Systèmes .8
4.3 Dispositif de captage .9
4.4 Tuyau de transfert .9
4.5 Sous-système de filtration .9
4.6 Sous-système de commande .10
4.7 Générateur de débit .10
4.8 Sous-système d’évacuation .10
4.9 Code couleur .10
5 Exigences relatives aux systèmes portables et mobiles .11
5.1 Exigences générales .11
5.2 Essai acoustique .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 10524-1:2018/Amd 1:2023(Amendment)
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 15002:2023(Main)
Flow control devices for connection to a medical gas supply system

This document specifies requirements for flow control devices that can be connected by the user either directly, by means of a probe or a gas-specific connector, or indirectly by means of a low-pressure hose assembly conforming with ISO 5359 to: a) a terminal unit conforming with ISO 9170-1 of a medical gas pipeline system conforming with ISO 7396-1:2016; b) the pressure outlet of a regulator conforming with ISO 10524-1:2018; or c) to the pressure outlet of a valve integrated pressure regulator (VIPR) conforming with ISO 10524-3 (see 5.2 gas inlets). This document applies to the following types of flow control devices (FCDs): a) flowmeters; b) flowgauge FCDs; and c) fixed orifice FCDs. NOTE Flow control devices that are classed as medical electrical equipment can be subject to additional requirements of IEC 60601-1. This document applies to flow control devices for the following gases: — oxygen; — oxygen 93 %; — nitrous oxide; — medical air; — carbon dioxide; — oxygen/nitrous oxide mixture 50/50 (% volume fraction); — oxygen-enriched air; — helium; — xenon; and — specified mixtures of the gases listed above. NOTE Flow control devices can be available for other gases. This document does not apply to flow control devices that are: a) for use with gases for driving surgical tools; b) an integral part of a regulator (see ISO 10524-1:2018); or c) an integral part of a valve with integrated pressure regulator (VIPR) (see ISO 10524-3).

  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    23 pages
    French language
    sale 15% off
ISO
ISO 11197:2019(Main)
Medical supply units

IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This document applies to the basic safety and essential performance of medical supply units, hereafter also referred to as ME equipment. This document applies to medical supply units manufactured within a factory or assembled on site, including cabinetry and other enclosures, which incorporate patient care services. NOTE 1 A party that assembles on site various components intended for patient care services into an enclosure is considered the manufacturer of the medical supply unit. Hazards inherent in the intended function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this standard, except in of IEC 60601-1:2005+A1:2012, 7.2.13 and 8.4.1 (see 201.1.4). NOTE 2 Refer to IEC 60601-1:2005+A1:2012, 4.2.

  • Standard
    36 pages
    English language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off
ISO
ISO 10524-3:2019(Main)
Pressure regulators for use with medical gases — Part 3: Pressure regulators integrated with cylinder valves (VIPRs)

This document specifies design, type testing, and marking requirements for cylinder valves with integrated pressure regulators [as defined in 3.26 and referred to hereafter as valves with integrated pressure regulators (VIPRs)] intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving surgical tools. Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures. This document applies to VIPRs mounted on refillable cylinders with a working pressure up to 30 000 kPa (300 bar) intended to be filled in cylinder filling facilities or on self-filling systems as used in homecare applications. VIPRs covered by this document are pressure pre-set and provided with a pressure outlet and/or pre-set flow outlet(s).

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    44 pages
    French language
    sale 15% off
ISO
ISO 10524-2:2018(Main)
Pressure regulators for use with medical gases — Part 2: Manifold and line pressure regulators

ISO 10524-2:2018 specifies design, construction, type testing, and marking requirements for manifold pressure regulators (as defined in 3.7) and line pressure regulators (as defined in 3.5) intended for use in medical gas pipeline systems. Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures. ISO 10524-2:2018 applies to manifold pressure regulators and line pressure regulators supplied as individual units or to the relevant components incorporated within an assembly. Manifold pressure regulators are intended to be connected to a manifold system which has a nominal inlet pressure, P1 of up to 30 000 kPa (300 bar). Line pressure regulators are intended to be connected downstream of the manifold pressure regulator with a supply pressure up to 3 000 kPa (30 bar). ISO 10524-2:2018 does not apply to pressure regulators for use with vacuum pipeline systems. NOTE Requirements for pressure regulators for use with vacuum pipeline systems are covered in ISO 10079‑3.

  • Standard
    31 pages
    English language
    sale 15% off
  • Standard
    32 pages
    French language
    sale 15% off
ISO
ISO 10524-1:2018(Main)
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices

ISO 10524-1:2018 specifies the design, construction, type testing, and marking requirements for pressure regulators (as defined in 3.18) intended for the administration of medical gases and their mixtures in the treatment, management, diagnostic evaluation and care of patients or for gases used for driving surgical tools. Examples of gases include oxygen, medical air and oxygen/nitrous oxide mixtures. ISO 10524-1:2018 applies to pressure regulators: a) intended to be connected to cylinders by the operator; b) with integral flow-metering devices intended to be connected to cylinders by the operator; c) that are an integral part of medical equipment (e.g. anaesthetic workstations, lung ventilators, resuscitators). A pressure regulator can be provided with pressure outlet or flow outlet, and can be adjustable or pre-set. pressure regulators are intended to be fitted to refillable cylinders with a working pressure up to 30 000 kPa ( 300 bar) and can be provided with devices which control and measure the flow of the medical gas delivered.

  • Standard
    33 pages
    English language
    sale 15% off
  • Standard
    34 pages
    French language
    sale 15% off
ISO
ISO 7396-1:2016/Amd 1:2017(Amendment)
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 9170-1:2017(Main)
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum

ISO 9170-1:2017 is intended especially to ensure the gas-specific assembly, mechanical resistance, flow, leakage and pressure drop of terminal units and to prevent their interchange between different gases and services and applies to terminal units: a) intended for use in medical gas pipeline systems in accordance with ISO 7396‑1; b) used as pressure outlets on pressure regulators in accordance with ISO 10524‑1; c) used as pressure outlets on pressure regulators integrated with cylinder valves (VIPR) in accordance with ISO 10524‑3. ISO 9170-1:2017 applies to terminal units for use with the following gases for administration to patients or for medical uses (A): - oxygen (A); - nitrous oxide (A); - medical air (A); - carbon dioxide (A); - oxygen/nitrous oxide mixture (A); - helium/oxygen mixtures (A); - oxygen 93 (A); - gases and gas mixtures classified as medical device (A); - gases delivered to medical devices or intended for medical purposes (A); - gases and gas mixtures for medicinal use not specified above (A). ISO 9170-1:2017 applies to terminal units for use with the following gases (B): - air for driving surgical tools (B); - nitrogen for driving surgical tools (B). This document applies to terminal units for use with vacuum systems (C). NOTE The requirements of this document can be used as guidelines for terminal units for other gases. These other gases will be considered for inclusion in this document when they come into general use. ISO 9170-1:2017 specifies requirements for terminal units for supply and disposal of nitrogen and air for driving surgical tools. ISO 9170-1:2017 specifies requirements for probes intended to be connected to the gas-specific connection point. ISO 9170-1:2017 does not specify the dimensions of probes or of the gas-specific connection points. NOTE Regional or national standards specifying dimensions of probes and gas-specific connection points are given in the Bibliography. Other connection systems in national use may be acceptable under this document. Dimensioning for such connections will be specified by their respective national standards. ISO 9170-1:2017 does not specify the requirements for terminal units for anaesthetic gas scavenging systems (AGSS), which are specified in ISO 9170‑2.

  • Standard
    25 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off
ISO
ISO 7396-1:2016(Main)
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum

ISO 7396-1:2016 specifies requirements for design, installation, function, performance, testing, commissioning and documentation of pipeline systems used in healthcare facilities for the following: - oxygen; - nitrous oxide; - medical air; - carbon dioxide; - oxygen/nitrous oxide mixtures (see Note 1); - helium/oxygen mixtures; - (*) oxygen 93; - gases and gas mixtures classified as medical device, gases delivered to medical devices or intended for medical purposes or gases and gas mixtures for medicinal use not specified above; - air for driving surgical tools; - nitrogen for driving surgical tools; - vacuum. NOTE 1 Regional or national regulations may prohibit the distribution of oxygen/nitrous oxide mixtures in medical gas pipeline systems. NOTE 2 Anaesthetic gas scavenging disposal systems are covered in ISO 7396‑2. This part of ISO 7396 includes requirements for supply systems, pipeline distribution systems, control systems, monitoring and alarm systems and non-interchangeability between components of different gas/vacuum systems. This part of ISO 7396 specifies safety requirements for pipeline systems used in healthcare facilities, both public and private. It applies to all facilities providing healthcare services regardless of type, size, location or range of services, including, but not limited to: a) acute care healthcare facilities; b) internal patient continuing care healthcare facilities; c) long-term care facilities; d) community-based providers; e) ambulatory and external patient care clinics (e.g. day surgery, endoscopy clinics and doctors' offices). NOTE 3 This part of ISO 7396 may also be used as reference for pipeline systems for medical gases and vacuum intended to be installed in places other than healthcare facilities. ISO 7396-1:2016 applies to the following different types of oxygen supply systems: - supply systems in which all sources of supply deliver oxygen; in this case the concentration of the oxygen will be greater than 99%; - supply systems in which all sources of supply deliver oxygen 93; in this case the concentration of the oxygen may vary between 90% and 96%; NOTE 4 A mixture of oxygen 93 and oxygen may be delivered by a medical gas supply system. In this case the concentration of the gas can vary between 90% and >99%. ISO 7396-1:2016 also applies to: - extensions of existing pipeline distribution systems; - modifications of existing pipeline distribution systems; - modifications or replacement of supply systems or sources of supply. Oxygen concentrators for domiciliary use are excluded from the scope of this part of ISO 7396. NOTE 5 Requirements for oxygen concentrators for domiciliary use are specified in ISO 80601‑2-69. (*) EN 14931 defines additional requirements for hyperbaric application, in particular for flows and pressures of compressed air required to pressurize the hyperbaric chamber and to drive other connected services. Also included are requirements for oxygen and other treatment gases administered to patients. ISO 7396-1:2016 does not apply to vacuum systems intended to be used in dentistry. ISO 7396-1:2016 does not apply to filling systems for transportable cylinders and transportable cylinder bundle systems.

  • Standard
    178 pages
    English language
    sale 15% off
  • Standard
    186 pages
    French language
    sale 15% off
ISO
ISO 15001:2010(Main)
Anaesthetic and respiratory equipment — Compatibility with oxygen

ISO 15001:2010 specifies requirements for the oxygen compatibility of materials, components and devices for anaesthetic and respiratory applications, which can come into contact with oxygen in normal condition or in single fault condition at gas pressures greater than 50 kPa. Additionally, ISO 15001:2010 gives general guidelines for the selection of materials and components based on available data on their oxygen compatibility, and for carrying out a risk analysis, including addressing the toxicity of products of combustion and/or decomposition. Aspects of compatibility that are addressed by ISO 15001:2010 include cleanliness, resistance to ignition and the toxicity of products of combustion and/or decomposition at the design, manufacturing, maintenance and disposal stages. ISO 15001:2010 is applicable to anaesthetic and respiratory equipment that is within the scope of ISO/TC 121, e.g. medical gas pipeline systems, pressure regulators, terminal units, medical supply units, flexible connections, flow-metering devices, anaesthetic workstations and lung ventilators.

  • Standard
    40 pages
    English language
    sale 15% off
  • Standard
    43 pages
    French language
    sale 15% off
  • Standard
    50 pages
    Russian language
    sale 15% off