SIST EN ISO 3262-3:2023
(Main)Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
This document specifies requirements and corresponding methods of test for blanc fixe.
Füllstoffe - Anforderungen und Prüfverfahren - Teil 3: Blanc fixe (ISO 3262-3:2023)
Dieses Dokument legt Anforderungen und die entsprechenden Prüfverfahren für Blanc fixe fest.
Matières de charge - Spécifications et méthodes d'essai - Partie 3: Blanc fixe (ISO 3262-3:2023)
Le présent document spécifie les exigences relatives au blanc fixe ainsi que les méthodes d’essai correspondantes.
Polnila - Specifikacije in preskusne metode - 3. del: Pobelitev (ISO 3262-3:2023)
Ta dokument določa zahteve in ustrezne preskusne metode za pobelitev.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 3262-3:2023
01-oktober-2023
Nadomešča:
SIST EN ISO 3262-3:1998
Polnila - Specifikacije in preskusne metode - 3. del: Pobelitev (ISO 3262-3:2023)
Extenders - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:2023)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 3: Blanc fixe (ISO 3262-3:2023)
Matières de charge - Spécifications et méthodes d'essai - Partie 3: Blanc fixe (ISO 3262-
3:2023)
Ta slovenski standard je istoveten z: EN ISO 3262-3:2023
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 3262-3:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 3262-3:2023
EN ISO 3262-3
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 3262-3:1998
English Version
Extenders - Specifications and methods of test - Part 3:
Blanc fixe (ISO 3262-3:2023)
Matières de charge - Spécifications et méthodes d'essai Füllstoffe - Anforderungen und Prüfverfahren - Teil 3:
- Partie 3: Blanc fixe (ISO 3262-3:2023) Blanc fixe (ISO 3262-3:2023)
This European Standard was approved by CEN on 14 January 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 3262-3:2023
EN ISO 3262-3:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 3262-3:2023
EN ISO 3262-3:2023 (E)
European foreword
This document (EN ISO 3262-3:2023) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2023, and conflicting national standards
shall be withdrawn at the latest by December 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3262-3:1998.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3262-3:2023 has been approved by CEN as EN ISO 3262-3:2023 without any
modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 3262-3:2023
---------------------- Page: 6 ----------------------
SIST EN ISO 3262-3:2023
INTERNATIONAL ISO
STANDARD 3262-3
Second edition
...
SLOVENSKI STANDARD
oSIST prEN ISO 3262-3:2022
01-december-2022
Polnila za barve - Specifikacije in metode preskušanja - 3. del: Pobelitev (ISO/DIS
3262-3:2022)
Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO/DIS
3262-3:2022)
Füllstoffe - Anforderungen und Prüfverfahren - Teil3: Blanc fixe (ISO/DIS 3262-3:2022)
Matières de charge pour peintures - Spécifications et méthodes d'essai - Partie 3: Blanc
fixe (ISO/DIS 3262-3:2022)
Ta slovenski standard je istoveten z: prEN ISO 3262-3
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 3262-3:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 3262-3:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 3262-3:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3262-3
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-09-20 2022-12-13
Extenders — Specifications and methods of test —
Part 3:
Blanc fixe
Matières de charge — Spécifications et méthodes d'essai —
Partie 3: Blanc fixe
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3262-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 3262-3:2022
ISO/DIS 3262-3:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3262-3
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
Extenders — Specifications and methods of test —
Part 3:
Blanc fixe
Matières de charge — Spécifications et méthodes d'essai —
Partie 3: Blanc fixe
ICS: 87.060.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 3262-3:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 3262-3:2022
ISO/DIS 3262-3:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements and test methods .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.